شرکت مهندسی بسافن

ژنراتور پلاسمای فرکانس رادیویی

Magnetron High Voltage Power Supply

Model:  HV5300BF

   The Basafan high-voltage power supplies are offered in the 1000-120000 V range. An important feature of the power supplies made by Basafan, especially for high voltages is the low storage energy in output stage and their small size. High stability, remote control capability, high-voltage separating probe and connector, controllable output current, arc management and various types of protection, voltage and current display, and a user interface panel have all turned these high-voltage power supplies into reliable industrial products.

Technical specifications

 

Model:HV5300MB

input power

 220 V (200-230), 50 (50-60) Hz

 Output voltage (DC)

 Adjustable up to (-5) KV

Output current

 Adjustable up to 300 mA

In series filament supply

Standard:3.3V&10A (custom parameters are available)

 Line regulation

 less than 0.5%

 Load regulation

 less than 0.5%

 Output ripple

 If the load resistance is stable and the momentary changes doesn't exist, depending on the output voltage, varies between half and one percent.

 Output sustainability

 About 15 minutes after adjusting the voltage and reaching the temperature stability, less than 0.5% per hour and after an hour, less than 0.5% per day.

 Display

 Voltage (4 digits)

 Protection

 Over temperature, short circuit, overvoltage protection, ground wire disconnection protection.

 Arc management

 If the output is short-circuited, the device will be disabled automatically and reset after about 750 milliseconds to the set value.

 Remote control

 Analog control- The user can control the magnetron power by connecting the microwave forward and reflected  power feedback.

 Working temperature

 5-40 degrees centigrade

 Cooling

 Air-cooled by fan

 Output connector

 Special design

 


  

Read 1399 times